Decimal Point Fanuc Parameter 3401

Decimal Point Fanuc Parameter 3401

Category : Fanuc

Messing With Parameters Can Be Fatal!!!!!

Decimal Point Fanuc Parameter, to change this parameters you need to go to the setting screen in MDI. Now put a 1 in the parameter write box.

Today we are going to change the parameter that allows us to program with or without a decimal point.

Decimal Point Fanuc Parameter

If you set parameter 3401 BIT 0 (DPI) to a 1 then you can input numbers like a calculator.

X5000 will be taken as 5000mm

If you set parameter 3401 BIT 0 (DPI) to a 0 then your numbers will be taken as microns..

X5000 will be taken as X5  (in other words 5000 microns you would need to program X5000. to get 5000mm

X5000000 would also work

Decimal Point Fanuc Parameter

This should make it work. If it doesn’t then maybe you should call the Samaritans.

Decimal Point Fanuc Parameter Why?

It doesn’t really matter how you set this it’s entirely up to you. What I would recommend is that you make all your CNC machines behave in the same way.

Teach everyone to always input a decimal point and then if it’s needed then you got it.

Parameters You may Want to Change

3203 Clear MDI Screen

3204 Unlock Program 9000 to 9999 and 8000 to 8999 to Edit

3402 G Codes that are Active When The machine is Turned On

6005 Allows the Use of Local Subroutines (Newer Control)

6050-6059  Allows you to Call a 9000 series Program with a G Code

6080-6089 Allows you to Call a 9000 series Program with An M Code

5003 Retain Geometry when you Press Reset

3291 Wear Offset requires Key to Adjust

8134 3453 allows you to use ,R and ,C (Rads and Chamfers)

That’s it away you go.

This guy has more CNC Manuals than you can shake a stick at.

Oh just one other thing before you go off and cripple your machine forever.

Do yourself a favor take a picture of the screen before you change a parameter. If you aint got a camera then you must have a piece of paper.

Even better back everything up.

Thanks

If you have been affected by any of the issues in this post or need CNC Counselling then contact me.

If you want to learn to program CNC Milling Machines

Look no further Contact CNC Training Centre


1 Comment

Ganesh

January 22, 2020 at 11:00 am

In my machine( you ji fanuc31i ) wear offset can’t alter above 2mm but want to adjust 10mm.. wat can I do

Log out of this account

Leave a Reply

WP to LinkedIn Auto Publish Powered By : XYZScripts.com