Heidenhain Sections in a Program
Category : Heidenhain
Heidenhain Sections, I don’t get to work on Heidenhain controls anywhere near as much as I would like to. A recent training program we undertook with a packaging company meant I got loads of time to have fun with this control whilst working with some fantastic people oh, and I got paid too.
Ever since I first worked on Heidenhain controls in the early 80s I have found them very intuitive. As with all the CNC controls (and I am gonna have a moan) they tend to get over complicated.
Heidenhain Sections, back then I think the bloke from Bridgeport plugged the machine in and said “there you go son” (I used to be quite young at one time). I think I persuaded him to give me a half hour crash course but it’s credit to Heidenhain, when someone like me where the elevator does not quite go to the top floor, can teach the sen (northern and midlands for self).
Anyway I got on great with it and I have loved em ever since.
It was quite basic then but now, although more complex, it’s got some really useful features. If you are a wiz kid on this control just stop reading now cos you are about to say “So what”.
Anyway what my video is about is a really cool way that you can navigate the programs.
You put bookmarks in your code and then on the right hand side you just see a list of these book marks.
You could put them at any strategic points in your programs like Tool Change or whatever. On the right you see a list of just these book marks and when you select one of them the program on the left it jumps to that section (I love it).
When code looks similar it’s so easy to start editing the wrong bit. Gets me so angry when I do that and then I get all confused, it can even lead to a smash up.
Anyway reading is so boring just watch the movie!
If you liked this video, please don’t forget to subscribe to my YouTube channel by going to: CNC Training Centre
- Fanuc training.
- CNC programming training.
- Want to learn CNC programming.
- Fanuc programming training.
- Yasnac programming training.
- Any type of CNC course.
Services offered at CNC Training Centre
Mazak Training Fanuc Training
Don’t forget we offer training on all types of Mazak Machines and all Fanuc Controls 6m to 31i Oi old to young.
[contact-form-7 id=”2706″ title=”Contact Form”]