Siemens Program Training Cool Siemens Stuff

Siemens Program Training Cool Siemens Stuff

Tags :

Category : Siemens Useful Stuff

Siemens Program Training

Contact CNC Training Centre for Siemens Training

This Article is About TOFFR

TOFFR….  No it’s not some kind of vegan substitute for cheese.

It’s a programming command on a Siemens 828 or 840 Sinumerik Control.

Now everyone who reads this crap knows that I usually start the articles about Siemens Program Training by saying how versatile they are.

Well today I’m not going to. Instead I’m going to show you a picture of the fly I bought from a local pet shop.

Her name is Tinkerbell.

“I want to buy a pet fly” I asked. “We don’t sell them” said the shopkeeper.

“Well there are quite a few in the window” was my reply.

I then forced him to sell me one for £25 (that taught him a lesson, I think he was afraid I’d call in trading standards)

Siemens Program Training TOFFR

I could talk about Tinkerbell all day, but I’m not going to, Iv’e written this amazing article all about TOFFR it’s the Siemens vegan option.

Let’s imagine you want to machine around the outside of a shape. You want to rough it and leave material on. So what do you do?

Two Programs?

Do you have two programs one bigger shape for roughing and one that is the correct finished shape?

No you use TOFFR

What TOFFR does is modify you tool radius in your offset file.

Firstly you add some to it.

TOFFR=1. (Add 1mm)

Run your program which will leave 1mm on the size.

Then…

TOFFR=0 (Sets it back to it’s original amount)

Run your program again this time the tool is back to it’s correct radius and will therefore finish the part.

Take a look at the code below.

WORKPIECE(,””,,”BOX”,48,0,10,-80,-52,-52,52,52)
G40 G94 G64 G90

T=”CUTTER 12″
M6
D01
G54 G94

G0 X58. Y0 S1500 M3

Z-10.5
M8

TOFFR=1.;Add 1mm to radius

SHAPE:
G1 G41 X48.Y0 F1500.
Y-48.RND=10.
X-48.RND=10.
Y48.RND=10
X48.RND=10.
Y0
G40 X58. Y0
ENDLABEL:

TOFFR=0;Reset Radius

REPEAT SHAPE

G0 Z50
M17

Let me explain what’s going on here.

This line:

TOFFR=1.;Add 1mm to radius

Will add 1mm to the active tool radius so you mill around the part leaving 1mm of extra material.

Then this line:

TOFFR=0;Reset Radius

Takes the 1mm back off so when you repeat the section of code with this line.

REPEAT SHAPE

It finishes the shape.

Here is a nice video I made.

Oh and if you want to know about repeating sections of program  and subprograms read this.

Thanks

If you feel you have been affected by any of the issues raised in this post or need CNC Counselling then contact me.

If you want to learn to program CNC Milling Machines

Siemens 840D Sinumerik training

Look no further Contact CNC Training Centre

 


Log out of this account

Leave a Reply

CNC Training Centre
WP to LinkedIn Auto Publish Powered By : XYZScripts.com