G80 G-code Fanuc

CNC Training Call David: 07834 858 407

I noticed a common search in google is G80 G-code Fanuc.

CNC Machines use what we call canned cycles in a nutshell G80 cancels a canned cycle.

What is a canned Cycle?

To be honest I think it is a funny choice of words “Canned Cycle”.

My guess would be that all the information to drill a hole would be kept together in a “Tin Can” to use whenever you want.

I made this…….

First of all we program the cycle this is a G81:

G81 G98 Z-10. R1.5 F200. X55. Y55. F250.

The machine will move to the position X55. Y55. then it will rapid to 1.5mm above the part (this is the R1.5). It will then feed down to Z-10. at a feed-rate of 250 mm per minute F250.

Finally it will use rapid to come out of the hole.

It then sits ready for the next move.

All you do now is just give more positions.

G81 G98 Z-10. R1.5 F150. X56. Y56. F200.
X70.
X85.
X90.
X95. Y65.
G80

Every time it moves to a position it will do whatever you stated in the canned cycle (G81)

You don’t add anything else to these positions.

G80 G-code Fanuc