Power Up Fanuc Parameter 3402

Power Up Fanuc Parameter 3402

Category : Fanuc

Messing With Parameters Can Be Fatal!!!!!

Power Up Fanuc Parameter 3402. To change parameters you need to go to the setting screen in MDI. Now put a 1 in the parameter write box.

Today we are going to change the parameter that sets all the modal G codes when you first turn on your machine. This is often known as the wake up state.

Power Up Fanuc Parameter How it works?

When you switch on your machine certain G codes will be active. But what are they? Well they are whatever you set in this parameter. Imagine you just typed in X50. Y50. in MDI and pressed cycle start. Would it rapid, feed or try and go around in an arc.

In parameter 3402 the different bits set the G codes that are active when you first turn on your machine.

#0 G01 (Set to zero you wake up in G00 set to 1 you wake up in G01)

#1 G18 (Set to zero you wake up in G17 set to 1 you wake up in G18)

Power Up Fanuc Parameter

Isn’t it just great to sort out those annoying problems?

Things like the machine waking up in incremental can be a potential disaster.

Other Parameters Of Interest

3203 Clear MDI Screen

3204 Unlock Program 9000 to 9999 and 8000 to 8999 to Edit

3401 Calculator Type Decimal Point or Integer

6005 Allows the Use of Local Subroutines (Newer Control)

6050-6059  Allows you to Call a 9000 series Program with a G Code

6080-6089 Allows you to Call a 9000 series Program with An M Code

5003 Retain Geometry when you Press Reset

8134 3453 allows you to use ,R and ,C (Rads and Chamfers)

That’s it away you go.

Oh just one other thing before you go off and cripple your machine forever.

Do yourself a favor take a picture of the screen before you change a parameter. If you aint got a camera then you must have a piece of paper.

Even better back everything up.

Thanks

If you have been affected by any of the issues in this post or need CNC Counselling then contact me.

Or call us

If you want to learn to program CNC Milling Machines

Look no further Contact CNC Training Centre


Log out of this account

Leave a Reply

CNC Training Centre
WP to LinkedIn Auto Publish Powered By : XYZScripts.com